RODE PinMic Microphone - Microphones -

RODE PinMic Microphone

My Product Code: PINMIC

The RODE PinMic is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone but provides greater mounting versatility.

Availability: Available

Excl. VAT £132.50 Incl. VAT £159.00
Cards Accepted
CameraKings 3year Warranty



Comprised of a cabled backplate and a removable omni-directional capsule head the PinMic is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric and the capsule head can be easily disguised covered or decorated to further conceal the microphone.

The PinMic capsule is discrete at only 9mm deep and 11mm in diameter and is supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting.

The microphone easily mounts through any fabric up to 1.5mm (0.006") thick without any damage to clothing. A longer pin version (PinMic-Long) is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick).

The microphone capsule is connected via a 1.2m (4') shielded detachable Kevlar reinforced cable that has been rigorously strain tested to ensure reliable performance.

The included mini-furry for high wind protection ensures quality recordings in adverse environments while the anti-trauma water resistant case provides rugged and secure protection for the microphone a spare capsule head the microphone cable and included accessories.

The PinMic is an ideal solution for film television video theatre house of worship and anywhere where a high quality microphone needs to be heard but not seen.

The RODE PinMic lapel microphone is designed and made in Australia and is covered by RODE Microphones' innovative 5 year 'no questions asked' warranty.


Additional Information

Acoustic PrinciplePressure Gradient
Active ElectronicsJFET impedance converter
Polar Pattern
Address TypeEnd
Frequency Range60Hz - 18kHz(selected HPF @0)
Output Impedance3000_
Maximum SPL110dB SPL (@ 1kHz 1% THD into 1K_ load)
Maximum Output Level189.0mV (@ 1kHz 1% THD into 1K_ load)
Sensitivity-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)25dB-A
Power Options +48V phantom power
Weight 10.00gm
Dimensions16.00mmH x 22.00mmW x 33.00mmD
Warranty 1 year with free extension to 5 years following registration
Product Manual No
Included PinMic (1.5mm pins) Discreet Pin-through Lapel Microphone; CLIP1 MiCon Cable Management Clip; Unpainted Mesh Head; Anti-Trauma Case; Tool Kit Tool Kit for PinMic; DeadMouse-Pin
Warranty CameraKings 3 Year Comprehensive Warranty