Currency:

Teradek Bolt Pro 600 TX Wireless Dual Format Set | CameraKings.co.uk

Teradek Bolt Pro 600 TX Wireless Dual Format Transmitter/Receiver Set

4445
My Product Code: TER-BOLT-960

Teradek Bolt Pro 600 is a latency-free wireless transmission system that sends 4:2:2, 1080p60 video at up to 600ft.

Availability: Available

Excl. VAT £4,445.00 Incl. VAT £5,334.00
Cards Accepted
CameraKings 3year Warranty

Description

Details

The Bolt Pro 600 uses a new RF design that extends the transmission range up to 600ft line of sight. The TX also includes 2 RP-SMA connections that can be outfitted with higher gain antennas to provide a more resilient wireless link over longer distances. Best of all, the 600 model includes both an HDMI and 3G-SDI input so you’ll be able to use it just about anywhere.

Specifications

Additional Information

Specifications

FEATURES

  • Increases the range all the way up to to 2000ft line of sight
  • Includes both HDMI and 3G-SDI inputs so it can function on any modern camera rig
  • Can also be augmented with high gain antennas for increased range and resiliency
  • Also available as HDMI or HD-SDI Sets
 

FIRMWARE UPGRADES

Firmware v1.1.0

IMPORTANT NOTES

  • You will NOT be able to downgrade Bolt Pro 300, 600, or 2000 firmware after performing this update. Please read the release notes carefully before proceeding.
  • Units will need to be re-paired after upgrading, See https://support.teradek.com/entries/91323093-Bolt-600-2000-Pairing for instructions.
  • Updates below apply to second generation Bolt Pro 300, 600, and 2000 only. First generation Bolt firmware is unchanged.

New Features

  • Implemented 10-bit color on SDI output when no format conversion is performed. This eliminates color banding
  • Added support for Arri/Canon/Sony recording flags
  • Added support for drop frame time code
  • Added support for record run time code
  • Added indication if camera is recording to RX time code status display

Changes and Improvements

  • Removed Transmission mode setting from Bolt Pro 2000. Unicast and Broadcast have now been combined into a single multicast mode
    • One TX can transmit to up to 4 RX units
    • DFS channels can be used
    • There are no power up/down dependencies between TX and RX (behavior of old Unicast mode)
  • Improved Connection and reconnection time in environments where non-DFS channels are available
  • Improved maximum reconnection distance
  • Improved frequency selection logic, improves signal robustness when interference is present on nearby frequencies
  • Improved format conversion engine: eliminated weaving artifacts when using deinterlacer; fixed the issue when video was not smooth when using format conversion
  • Restored time code operation on Bolt Pro 2000
  • Improved time code accuracy
  • Implemented better time code handling when input frame rate is not the same as output frame rate
  • Changed the way the time code is generated when the link is lost -- Record stop command is sent if link is lost for 5 seconds
  • Improved reconnection reliability when TX is turned off for a prolonged amount of time (an hour or more)

Bug Fixes

  • Fixed intermittent video flickering within one minute of initial connection
  • Receiver would occasionally hang when the video format changed
  • The top line of 720p50 and 1080p24 HDMI output formats was cut off
  • If only DFS channels were selected on Bolt 600 or 2000 they could not reconnect

Bolt Manager 3.0.7

New Features

  • Added pairing and configuration support for First generation Bolt, Bolt Pro, and Bolt 2000
  • Added pairing instructions for second generation Bolt Pro (300, 600, and 2000)
  • Added firmware upgrade support for Bolt Pro SDI TX/RX and Bolt Pro 2000 TX (see Bolt Manager for specific revisions)

Bug Fixes

  • Radio 2 version was read incorrectly
  • Transmitter pairing mode could not be activated if connected to a computer
  • Minor stability improvements and bug fixes

Bolt Manager 3.0.6

Changes/Improvements

  • Improved reliability of radio module firmware upgrade
  • Improved reliability and significantly increases the speed of Video Processor firmware upgrade
  • Improved reliability of USB communications with the Bolt

Click here for the latest Firmware and Software

 

Product Manual No
Warranty CameraKings 3 Year Comprehensive Warranty